【Kubernetes】生产级高可用集群二进制部署全流程深度实战指南（v1.20.2）

admin / Kubernetes / 已更新 2026-09-22 / 8388 字 · 约 110 分钟 / 12817 次阅读 /
📑 文章章节大纲 (点击平滑直达)
▾

在生产级企业架构中，虽然 kubeadm 大幅降低了 Kubernetes 的初次上手门槛，但其隐藏的大量证书管理细节、默认参数固化以及故障排查的不透明性，使得许多严苛的生产环境依然将 纯二进制高可用部署 作为标准规范。

采用二进制方式部署 Kubernetes 集群，不仅能够透彻理解 API-Server、Controller-Manager、Scheduler、Kubelet 以及 ETCD 等核心组件之间的 TLS 双向认证通信机理，更能为后续的集群调优、故障自愈与架构维护打下坚实底座。

本文基于官方稳定版本 Kubernetes v1.20.2 与 ETCD v3.4.13，手把手带领大家搭建一套生产级、跨多节点的完整高可用容器集群。

一、kubeadm 与二进制部署方案对比

对比维度 Kubeadm 自动化部署 生产级二进制部署
部署难度 极低（一键 kubeadm init） 较高（需手动签发全套证书、编写 Systemd）
透明度 较低（组件作为 Static Pod 运行在容器中） 极高（所有组件作为 Systemd 服务原生运行）
证书管理 默认证书有效期仅 1 年，续签相对繁琐 完全自定义 CA，证书有效期可任意指定（如 10 年）
故障排查 依赖容器运行时与 crictl，链路较长 直连 systemctl 与 journalctl，排障直观秒级定位
内核参数定制 难以自由定制各组件精细启动参数 完全自主掌控每个二进制启动 Flag 与资源分配
生产适用性 适合开发测试、PoC 验证及快速上云环境 大型企业私有云、高安全金融级场景的基准方案

二、集群拓扑规划与基础环境加固

1. 机器节点拓扑规划

IP 地址 机器名称 机器配置 操作系统 节点角色 安装运行组件
172.10.1.11 master1 2C4G CentOS 7.6 Master 控制节点 kube-apiserver, controller-manager, scheduler, etcd
172.10.1.12 master2 2C4G CentOS 7.6 Master 控制节点 kube-apiserver, controller-manager, scheduler, etcd
172.10.1.13 master3 2C4G CentOS 7.6 Master 控制节点 kube-apiserver, controller-manager, scheduler, etcd
172.10.1.14 node1 2C4G CentOS 7.6 Worker 计算节点 docker, kubelet, kube-proxy
172.10.1.15 node2 2C4G CentOS 7.6 Worker 计算节点 docker, kubelet, kube-proxy
172.10.1.16 node3 2C4G CentOS 7.6 Worker 计算节点 docker, kubelet, kube-proxy
172.10.0.20 k8s-vip - - 负载均衡 VIP 云厂商 SLB 或自建 HAProxy + Keepalived

[!TIP] 上表中的 VIP 172.10.0.20 是集群 Master 控制平面的统一反向代理入口，面向 Worker 节点及外部客户端提供高可用路由。

2. 软件核心组件版本

核心组件 选定版本 说明
Kubernetes v1.20.2 包含 apiserver, controller-manager, scheduler, kubelet, kube-proxy
ETCD v3.4.13 分布式一致性元数据存储集群
Docker 19.03.14 容器运行时（Container Runtime）
Calico v3.14 高性能 BGP 容器网络 CNI 插件
CoreDNS 1.7.0 集群内置 Service 域名解析服务
CFSSL v1.5.0 CloudFlare 开源 TLS/PKI 证书签发工具集

三、主机操作系统基础初始化 (6台节点全量执行)

以下配置在 6 台机器上面操作

1. 修改各节点主机名

修改主机名称：master1、master2、master3、node1、node2、node3

2. 配置全网 /etc/hosts 解析

修改机器的/etc/hosts 文件

cat >> /etc/hosts << EOF
172.10.1.11 master1
172.10.1.12 master2
172.10.1.13 master3
172.10.1.14 node1
172.10.1.15 node2
172.10.1.16 node3
EOF

3. 彻底禁用防火墙与 SELinux

systemctl stop firewalld
setenforce 0
sed -i 's/^SELINUX=.\*/SELINUX=disabled/' /etc/selinux/config

4. 禁用系统 Swap 交换分区

swapoff -a
永久关闭，修改/etc/fstab,注释掉swap一行

5. 部署 Chrony 全节点高精度时间同步

yum install -y chrony
systemctl start chronyd
systemctl enable chronyd
chronyc sources

6. 调整 Linux 内核网桥与转发参数

cat > /etc/sysctl.d/k8s.conf << EOF
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system

7. 开启 IPVS 内核模块支持

modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
lsmod | grep ip_vs
lsmod | grep nf_conntrack_ipv4
yum install -y ipvsadm

四、初始化集群证书工具与统一目录架构

每台机器都需要配置证书文件、组件的配置文件、组件的服务启动文件，现专门选择 master1 来统一生成这些文件，然后再分发到其他机器。以下操作在 master1 上进行

[root@master1 ~]# mkdir -p /data/work
注：该目录为配置文件和证书文件生成目录，后面的所有文件生成相关操作均在此目录下进行
[root@master1 ~]# ssh-keygen -t rsa -b 2048
将秘钥分发到另外五台机器，让 master1 可以免密码登录其他机器

五、部署 ETCD 分布式高可用存储集群

1. 规划 ETCD 工作目录

[root@master1 ~]# mkdir -p /etc/etcd                     # 配置文件存放目录
[root@master1 ~]# mkdir -p /etc/etcd/ssl               # 证书文件存放目录

2. 签发 ETCD 双向 TLS 证书

工具下载

[root@master1 work]# cd /data/work/
[root@master1 work]# wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
[root@master1 work]# wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
[root@master1 work]# wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64

工具配置

[root@master1 work]# chmod +x cfssl*
[root@master1 work]# mv cfssl_linux-amd64 /usr/local/bin/cfssl
[root@master1 work]# mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
[root@master1 work]# mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo

配置 ca 请求文件

[root@master1 work]# vim ca-csr.json
{
  "CN": "kubernetes",
  "key": {
      "algo": "rsa",
      "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "k8s",
      "OU": "system"
    }
  ],
  "ca": {
          "expiry": "87600h"
  }
}

注： CN：Common Name，kube-apiserver 从证书中提取该字段作为请求的用户名 (User Name)；浏览器使用该字段验证网站是否合法； O：Organization，kube-apiserver 从证书中提取该字段作为请求用户所属的组 (Group)

创建 ca 证书

[root@master1 work]# cfssl gencert -initca ca-csr.json  | cfssljson -bare ca

配置 ca 证书策略

[root@master1 work]# vim ca-config.json
{
  "signing": {
      "default": {
          "expiry": "87600h"
        },
      "profiles": {
          "kubernetes": {
              "usages": [
                  "signing",
                  "key encipherment",
                  "server auth",
                  "client auth"
              ],
              "expiry": "87600h"
          }
      }
  }
}

配置 etcd 请求 csr 文件

[root@master1 work]# vim etcd-csr.json
{
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
    "172.10.1.11",
    "172.10.1.12",
    "172.10.1.13"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [{
    "C": "CN",
    "ST": "Hubei",
    "L": "Wuhan",
    "O": "k8s",
    "OU": "system"
  }]
}

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes etcd-csr.json | cfssljson  -bare etcd
[root@master1 work]# ls etcd*.pem
etcd-key.pem  etcd.pem

3. 部署并启动 ETCD 集群

下载 etcd 软件包

[root@master1 work]# wget https://github.com/etcd-io/etcd/releases/download/v3.4.13/etcd-v3.4.13-linux-amd64.tar.gz
[root@master1 work]# tar -xf etcd-v3.4.13-linux-amd64.tar.gz
[root@master1 work]# cp -p etcd-v3.4.13-linux-amd64/etcd* /usr/local/bin/
[root@master1 work]# rsync -vaz etcd-v3.4.13-linux-amd64/etcd* master2:/usr/local/bin/
[root@master1 work]# rsync -vaz etcd-v3.4.13-linux-amd64/etcd* master3:/usr/local/bin/

创建配置文件

[root@master1 work]# vim etcd.conf
#[Member]
ETCD_NAME="etcd1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://172.10.1.11:2380"
ETCD_LISTEN_CLIENT_URLS="https://172.10.1.11:2379,http://127.0.0.1:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://172.10.1.11:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://172.10.1.11:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://172.10.1.11:2380,etcd2=https://172.10.1.12:2380,etcd3=https://172.10.1.13:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

注： ETCD_NAME：节点名称，集群中唯一 ETCD_DATA_DIR：数据目录 ETCD_LISTEN_PEER_URLS：集群通信监听地址 ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址 ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址 ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址 ETCD_INITIAL_CLUSTER：集群节点地址 ETCD_INITIAL_CLUSTER_TOKEN：集群 Token ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new 是新集群，existing 表示加入已有集群

创建启动服务文件 方式一： 有配置文件的启动

[root@master1 work]# vim etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=-/etc/etcd/etcd.conf
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd \
  --cert-file=/etc/etcd/ssl/etcd.pem \
  --key-file=/etc/etcd/ssl/etcd-key.pem \
  --trusted-ca-file=/etc/etcd/ssl/ca.pem \
  --peer-cert-file=/etc/etcd/ssl/etcd.pem \
  --peer-key-file=/etc/etcd/ssl/etcd-key.pem \
  --peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \
  --peer-client-cert-auth \
  --client-cert-auth
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

方式二： 无配置文件的启动方式

[root@master1 work]# vim etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd \
  --name=etcd1 \
  --data-dir=/var/lib/etcd/default.etcd \
  --cert-file=/etc/etcd/ssl/etcd.pem \
  --key-file=/etc/etcd/ssl/etcd-key.pem \
  --trusted-ca-file=/etc/etcd/ssl/ca.pem \
  --peer-cert-file=/etc/etcd/ssl/etcd.pem \
  --peer-key-file=/etc/etcd/ssl/etcd-key.pem \
  --peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \
  --peer-client-cert-auth \
  --client-cert-auth \
  --listen-peer-urls=https://172.10.1.11:2380 \
  --listen-client-urls=https://172.10.1.11:2379,http://127.0.0.1:2379 \
  --advertise-client-urls=https://172.10.1.11:2379 \
  --initial-advertise-peer-urls=https://172.10.1.11:2380 \
  --initial-cluster=etcd1=https://172.10.1.11:2380,etcd2=https://172.10.1.12:2380,etcd3=https://172.10.1.13:2380 \
  --initial-cluster-token=etcd-cluster \
  --initial-cluster-state=new
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

注：本文采用第一种方式

同步相关文件到各个节点

[root@master1 work]# cp ca*.pem /etc/etcd/ssl/
[root@master1 work]# cp etcd*.pem /etc/etcd/ssl/
[root@master1 work]# cp etcd.conf /etc/etcd/
[root@master1 work]# cp etcd.service /usr/lib/systemd/system/
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd.conf $i:/etc/etcd/;done
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd*.pem ca*.pem $i:/etc/etcd/ssl/;done
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd.service $i:/usr/lib/systemd/system/;done

注：master2 和 master3 分别修改配置文件中 etcd 名字和 ip，并创建目录 /var/lib/etcd/default.etcd

启动 etcd 集群

[root@master1 work]# mkdir -p /var/lib/etcd/default.etcd
[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable etcd.service
[root@master1 work]# systemctl start etcd.service
[root@master1 work]# systemctl status etcd

注：第一次启动可能会卡一段时间，因为节点会等待其他节点启动

查看集群状态

[root@master1 work]# ETCDCTL_API=3 /usr/local/bin/etcdctl --write-out=table --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --endpoints=https://172.10.1.11:2379,https://172.10.1.12:2379,https://172.10.1.13:2379 endpoint health

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/0aa4dc77-65c7-486e-a454-d56609898991/1450914-20210118230524841-1725295913.png

六、部署 Kubernetes 控制平面核心组件

1. 下载官方二进制软件包

[root@master1 work]# wget https://dl.k8s.io/v1.20.1/kubernetes-server-linux-amd64.tar.gz
[root@master1 work]# tar -xf kubernetes-server-linux-amd64.tar
[root@master1 work]# cd kubernetes/server/bin/
[root@master1 bin]# cp kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/
[root@master1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl master2:/usr/local/bin/
[root@master1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl master3:/usr/local/bin/
[root@master1 bin]# for i in node1 node2 node3;do rsync -vaz kubelet kube-proxy $i:/usr/local/bin/;done
[root@master1 bin]# cd /data/work/

2. 统一初始化组件安装目录

[root@master1 work]# mkdir -p /etc/kubernetes/          # kubernetes组件配置文件存放目录
[root@master1 work]# mkdir -p /etc/kubernetes/ssl     # kubernetes组件证书文件存放目录
[root@master1 work]# mkdir /var/log/kubernetes        # kubernetes组件日志文件存放目录

3. 部署 kube-apiserver（TLS 证书与服务）

创建 csr 请求文件

[root@master1 work]# vim kube-apiserver-csr.json
{
  "CN": "kubernetes",
  "hosts": [
    "127.0.0.1",
    "172.10.1.11",
    "172.10.1.12",
    "172.10.1.13",
    "172.10.1.14",
    "172.10.1.15",
    "172.10.1.16",
    "172.10.0.20",
    "10.255.0.1",
    "kubernetes",
    "kubernetes.default",
    "kubernetes.default.svc",
    "kubernetes.default.svc.cluster",
    "kubernetes.default.svc.cluster.local"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "k8s",
      "OU": "system"
    }
  ]
}

注： 如果 hosts 字段不为空则需要指定授权使用该证书的 IP 或域名列表。 由于该证书后续被 kubernetes master 集群使用，需要将 master 节点的 IP 都填上，同时还需要填写 service 网络的首个 IP。（一般是 kube-apiserver 指定的 service-cluster-ip-range 网段的第一个 IP，如 10.254.0.1)

生成证书和 token 文件

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver
[root@master1 work]# cat > token.csv << EOF
$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF

创建配置文件

[root@master1 work]# vim kube-apiserver.conf
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \
  --anonymous-auth=false \
  --bind-address=172.10.1.11 \
  --secure-port=6443 \
  --advertise-address=172.10.1.11 \
  --insecure-port=0 \
  --authorization-mode=Node,RBAC \
  --runtime-config=api/all=true \
  --enable-bootstrap-token-auth \
  --service-cluster-ip-range=10.255.0.0/16 \
  --token-auth-file=/etc/kubernetes/token.csv \
  --service-node-port-range=30000-50000 \
  --tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem  \
  --tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \
  --client-ca-file=/etc/kubernetes/ssl/ca.pem \
  --kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \
  --kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \
  --service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \
    --service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem  \      # 1.20以上版本必须有此参数
  --service-account-issuer=https://kubernetes.default.svc.cluster.local \   # 1.20以上版本必须有此参数
  --etcd-cafile=/etc/etcd/ssl/ca.pem \
  --etcd-certfile=/etc/etcd/ssl/etcd.pem \
  --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \
  --etcd-servers=https://172.10.1.11:2379,https://172.10.1.12:2379,https://172.10.1.13:2379 \
  --enable-swagger-ui=true \
  --allow-privileged=true \
  --apiserver-count=3 \
  --audit-log-maxage=30 \
  --audit-log-maxbackup=3 \
  --audit-log-maxsize=100 \
  --audit-log-path=/var/log/kube-apiserver-audit.log \
  --event-ttl=1h \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=4"

注： --logtostderr：启用日志 --v：日志等级 --log-dir：日志目录 --etcd-servers：etcd 集群地址 --bind-address：监听地址 --secure-port：https 安全端口 --advertise-address：集群通告地址 --allow-privileged：启用授权 --service-cluster-ip-range：Service 虚拟 IP 地址段 --enable-admission-plugins：准入控制模块 --authorization-mode：认证授权，启用 RBAC 授权和节点自管理 --enable-bootstrap-token-auth：启用 TLS bootstrap 机制 --token-auth-file：bootstrap token 文件 --service-node-port-range：Service nodeport 类型默认分配端口范围 --kubelet-client-xxx：apiserver 访问 kubelet 客户端证书 --tls-xxx-file：apiserver https 证书 --etcd-xxxfile：连接 Etcd 集群证书 --audit-log-xxx：审计日志

创建服务启动文件

[root@master1 work]# vim kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=etcd.service
Wants=etcd.service

[Service]
EnvironmentFile=-/etc/kubernetes/kube-apiserver.conf
ExecStart=/usr/local/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

同步相关文件到各个节点

[root@master1 work]# cp ca*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-apiserver*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp token.csv /etc/kubernetes/
[root@master1 work]# cp kube-apiserver.conf /etc/kubernetes/
[root@master1 work]# cp kube-apiserver.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz token.csv master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz token.csv master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver*.pem master2:/etc/kubernetes/ssl/     # 主要rsync同步文件，只能创建最后一级目录，如果ssl目录不存在会自动创建，但是上一级目录kubernetes必须存在
[root@master1 work]# rsync -vaz kube-apiserver*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz ca*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz ca*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-apiserver.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-apiserver.service master3:/usr/lib/systemd/system/

注：master2 和 master3 配置文件的 IP 地址修改为实际的本机 IP

启动服务

[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-apiserver
[root@master1 work]# systemctl start kube-apiserver
[root@master1 work]# systemctl status kube-apiserver
测试
[root@master1 work]# curl --insecure https://172.10.1.11:6443/
有返回说明启动正常

4. 部署 kubectl 客户端并生成 kubeconfig

创建 csr 请求文件

[root@master1 work]# vim admin-csr.json
{
  "CN": "admin",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "system:masters",
      "OU": "system"
    }
  ]
}

说明： 后续 kube-apiserver 使用 RBAC 对客户端（如 kubelet、kube-proxy、Pod)请求进行授权； kube-apiserver 预定义了一些 RBAC 使用的 RoleBindings，如 cluster-admin 将 Group system:masters 与 Role cluster-admin 绑定，该 Role 授予了调用 kube-apiserver 的所有 API 的权限； O 指定该证书的 Group 为 system:masters，kubelet 使用该证书访问 kube-apiserver 时 ，由于证书被 CA 签名，所以认证通过，同时由于证书用户组为经过预授权的 system:masters，所以被授予访问所有 API 的权限； 注： 这个 admin 证书，是将来生成管理员用的 kube config 配置文件用的，现在我们一般建议使用 RBAC 来对 kubernetes 进行角色权限控制， kubernetes 将证书中的 CN 字段 作为 User， O 字段作为 Group； "O": "system:masters", 必须是 system:masters，否则后面 kubectl create clusterrolebinding 报错。

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin
[root@master1 work]# cp admin*.pem /etc/kubernetes/ssl/

创建 kubeconfig 配置文件 kubeconfig 为 kubectl 的配置文件，包含访问 apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书

设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube.config
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials admin --client-certificate=admin.pem --client-key=admin-key.pem --embed-certs=true --kubeconfig=kube.config
设置上下文参数
[root@master1 work]# kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config
设置默认上下文
[root@master1 work]# kubectl config use-context kubernetes --kubeconfig=kube.config
[root@master1 work]# mkdir ~/.kube
[root@master1 work]# cp kube.config ~/.kube/config
授权kubernetes证书访问kubelet api权限
[root@master1 work]# kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes

查看集群组件状态 上面步骤完成后，kubectl 就可以与 kube-apiserver 通信了

[root@master1 work]# kubectl cluster-info
[root@master1 work]# kubectl get componentstatuses
[root@master1 work]# kubectl get all --all-namespaces

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/bd722f1e-f792-41e4-8732-a50d320b3ae6/1450914-20210118230758466-581694079.png

同步 kubectl 配置文件到其他节点

[root@master1 work]# rsync -vaz /root/.kube/config master2:/root/.kube/
[root@master1 work]# rsync -vaz /root/.kube/config master3:/root/.kube/

配置 kubectl 子命令补全

[root@master1 work]# yum install -y bash-completion
[root@master1 work]# source /usr/share/bash-completion/bash_completion
[root@master1 work]# source <(kubectl completion bash)
[root@master1 work]# kubectl completion bash > ~/.kube/completion.bash.inc
[root@master1 work]# source '/root/.kube/completion.bash.inc'
[root@master1 work]# source $HOME/.bash_profile

5. 部署 kube-controller-manager 服务

创建 csr 请求文件

[root@master1 work]# vim kube-controller-manager-csr.json
{
    "CN": "system:kube-controller-manager",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "hosts": [
      "127.0.0.1",
      "172.10.1.11",
      "172.10.1.12",
      "172.10.1.13"
    ],
    "names": [
      {
        "C": "CN",
        "ST": "Hubei",
        "L": "Wuhan",
        "O": "system:kube-controller-manager",
        "OU": "system"
      }
    ]
}

注： hosts 列表包含所有 kube-controller-manager 节点 IP； CN 为 system:kube-controller-manager、O 为 system:kube-controller-manager，kubernetes 内置的 ClusterRoleBindings system:kube-controller-manager 赋予 kube-controller-manager 工作所需的权限生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
[root@master1 work]# ls kube-controller-manager*.pem

创建 kube-controller-manager 的 kubeconfig

设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube-controller-manager.kubeconfig
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig
设置上下文参数
[root@master1 work]# kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig
设置默认上下文
[root@master1 work]# kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

创建配置文件

[root@master1 work]# vim kube-controller-manager.conf
KUBE_CONTROLLER_MANAGER_OPTS="--port=0 \
  --secure-port=10252 \
  --bind-address=127.0.0.1 \
  --kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \
  --service-cluster-ip-range=10.255.0.0/16 \
  --cluster-name=kubernetes \
  --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \
  --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --allocate-node-cidrs=true \
  --cluster-cidr=10.0.0.0/16 \
  --experimental-cluster-signing-duration=87600h \
  --root-ca-file=/etc/kubernetes/ssl/ca.pem \
  --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --leader-elect=true \
  --feature-gates=RotateKubeletServerCertificate=true \
  --controllers=*,bootstrapsigner,tokencleaner \
  --horizontal-pod-autoscaler-use-rest-clients=true \
  --horizontal-pod-autoscaler-sync-period=10s \
  --tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \
  --tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \
  --use-service-account-credentials=true \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2"

创建启动文件

[root@master1 work]# vim kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-controller-manager.conf
ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

同步相关文件到各个节点

[root@master1 work]# cp kube-controller-manager*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-controller-manager.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kube-controller-manager.conf /etc/kubernetes/
[root@master1 work]# cp kube-controller-manager.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-controller-manager*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-controller-manager*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-controller-manager.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-controller-manager.service master3:/usr/lib/systemd/system/

启动服务

[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-controller-manager
[root@master1 work]# systemctl start kube-controller-manager
[root@master1 work]# systemctl status kube-controller-manager

6. 部署 kube-scheduler 服务

创建 csr 请求文件

[root@master1 work]# vim kube-scheduler-csr.json
{
    "CN": "system:kube-scheduler",
    "hosts": [
      "127.0.0.1",
      "172.10.1.11",
      "172.10.1.12",
      "172.10.1.13"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "Hubei",
        "L": "Wuhan",
        "O": "system:kube-scheduler",
        "OU": "system"
      }
    ]
}

注： hosts 列表包含所有 kube-scheduler 节点 IP； CN 为 system:kube-scheduler、O 为 system:kube-scheduler，kubernetes 内置的 ClusterRoleBindings system:kube-scheduler 将赋予 kube-scheduler 工作所需的权限。

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler
[root@master1 work]# ls kube-scheduler*.pem

创建 kube-scheduler 的 kubeconfig

设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube-scheduler.kubeconfig
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig
设置上下文参数
[root@master1 work]# kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
设置默认上下文
[root@master1 work]# kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

创建配置文件

[root@master1 work]# vim kube-scheduler.conf
KUBE_SCHEDULER_OPTS="--address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \
--leader-elect=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"

创建服务启动文件

[root@master1 work]# vim kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf
ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

同步相关文件到各个节点

[root@master1 work]# cp kube-scheduler*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-scheduler.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kube-scheduler.conf /etc/kubernetes/
[root@master1 work]# cp kube-scheduler.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-scheduler*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-scheduler*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-scheduler.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-scheduler.service master3:/usr/lib/systemd/system/

启动服务

[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-scheduler
[root@master1 work]# systemctl start kube-scheduler
[root@master1 work]# systemctl status kube-scheduler

七、部署 Worker 计算节点与网络组件

1. 安装 Docker 容器运行时

在三个 work 节点上安装安装 docker

[root@node1 ~]# wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
[root@node1 ~]# yum install -y docker-ce
[root@node1 ~]# systemctl enable docker
[root@node1 ~]# systemctl start docker
[root@node1 ~]# docker --version

修改 docker 源和驱动

[root@node1 ~]# cat > /etc/docker/daemon.json << EOF
{
    "exec-opts": ["native.cgroupdriver=systemd"],
    "registry-mirrors": [
        "https://1nj0zren.mirror.aliyuncs.com",
        "https://kfwkfulq.mirror.aliyuncs.com",
        "https://2lqq34jg.mirror.aliyuncs.com",
        "https://pee6w651.mirror.aliyuncs.com",
        "http://hub-mirror.c.163.com",
        "https://docker.mirrors.ustc.edu.cn",
        "http://f1361db2.m.daocloud.io",
        "https://registry.docker-cn.com"
    ]
}
EOF
[root@node1 ~]# systemctl restart docker
[root@node1 ~]# docker info | grep "Cgroup Driver"

下载依赖镜像

[root@node1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2
[root@node1 ~]# docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2 k8s.gcr.io/pause:3.2
[root@node1 ~]# docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2

[root@node1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0
[root@node1 ~]# docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0 k8s.gcr.io/coredns:1.7.0
[root@node1 ~]# docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0

2. 部署 kubelet 组件并配置 TLS Bootstrap 自动签发

以下操作在 master1 上操作创建 kubelet-bootstrap.kubeconfig

[root@master1 work]# BOOTSTRAP_TOKEN=$(awk -F "," '{print $1}' /etc/kubernetes/token.csv)
设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kubelet-bootstrap.kubeconfig
设置客户端认证参数
[root@master1 work]# kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=kubelet-bootstrap.kubeconfig
设置上下文参数
[root@master1 work]# kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig
设置默认上下文
[root@master1 work]# kubectl config use-context default --kubeconfig=kubelet-bootstrap.kubeconfig
创建角色绑定
[root@master1 work]# kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap

创建配置文件

[root@master1 work]#  vim kubelet.json
{
  "kind": "KubeletConfiguration",
  "apiVersion": "kubelet.config.k8s.io/v1beta1",
  "authentication": {
    "x509": {
      "clientCAFile": "/etc/kubernetes/ssl/ca.pem"
    },
    "webhook": {
      "enabled": true,
      "cacheTTL": "2m0s"
    },
    "anonymous": {
      "enabled": false
    }
  },
  "authorization": {
    "mode": "Webhook",
    "webhook": {
      "cacheAuthorizedTTL": "5m0s",
      "cacheUnauthorizedTTL": "30s"
    }
  },
  "address": "172.10.1.14",
  "port": 10250,
  "readOnlyPort": 10255,
  "cgroupDriver": "cgroupfs",                     # 如果docker的驱动为systemd，处修改为systemd。此处设置很重要，否则后面node节点无法加入到集群
  "hairpinMode": "promiscuous-bridge",
  "serializeImagePulls": false,
  "featureGates": {
    "RotateKubeletClientCertificate": true,
    "RotateKubeletServerCertificate": true
  },
  "clusterDomain": "cluster.local.",
  "clusterDNS": ["10.255.0.2"]
}

创建启动文件

[root@master1 work]# vim kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet \
  --bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \
  --cert-dir=/etc/kubernetes/ssl \
  --kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
  --config=/etc/kubernetes/kubelet.json \
  --network-plugin=cni \
  --pod-infra-container-image=k8s.gcr.io/pause:3.2 \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

注： –hostname-override：显示名称，集群中唯一 –network-plugin：启用 CNI –kubeconfig：空路径，会自动生成，后面用于连接 apiserver –bootstrap-kubeconfig：首次启动向 apiserver 申请证书 –config：配置参数文件 –cert-dir：kubelet 证书生成目录 –pod-infra-container-image：管理 Pod 网络容器的镜像

同步相关文件到各个节点

[root@master1 work]# cp kubelet-bootstrap.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kubelet.json /etc/kubernetes/
[root@master1 work]# cp kubelet.service /usr/lib/systemd/system/
以上步骤，如果master节点不安装kubelet，则不用执行
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kubelet-bootstrap.kubeconfig kubelet.json $i:/etc/kubernetes/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz ca.pem $i:/etc/kubernetes/ssl/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kubelet.service $i:/usr/lib/systemd/system/;done

注：kubelete.json 配置文件 address 改为各个节点的 ip 地址启动服务 各个 work 节点上操作

[root@node1 ~]# mkdir /var/lib/kubelet
[root@node1 ~]# mkdir /var/log/kubernetes
[root@node1 ~]# systemctl daemon-reload
[root@node1 ~]# systemctl enable kubelet
[root@node1 ~]# systemctl start kubelet
[root@node1 ~]# systemctl status kubelet

确认 kubelet 服务启动成功后，接着到 master 上 Approve 一下 bootstrap 请求。执行如下命令可以看到三个 worker 节点分别发送了三个 CSR 请求：

[root@master1 work]# kubectl get csr

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/b94f58ff-a989-4c1e-9715-e0e1d72530bd/1450914-20210118231136154-2081188300.png

[root@master1 work]# kubectl certificate approve node-csr-HlX3cExsZohWsu8Dd6Rp_ztFejmMdpzvti_qgxo4SAQ [root@master1 work]# kubectl certificate approve node-csr-oykYfnH_coRF2PLJH4fOHlGznOZUBPDg5BPZXDo2wgk [root@master1 work]# kubectl certificate approve node-csr-ytRB2fikhL6dykcekGg4BdD87o-zw9WPU44SZ1nFT50 [root@master1 work]# kubectl get csr [root@master1 work]# kubectl get nodes

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/7a0199bb-01cc-43c7-9e78-8663cac8c87e/1450914-20210118231231841-1290281127.png

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/a1349072-d970-4261-a63e-61d62078d284/1450914-20210118231300576-1622775037.png

3. 部署 kube-proxy 组件（IPVS 负载均衡）

创建 csr 请求文件

[root@master1 work]# vim kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "k8s",
      "OU": "system"
    }
  ]
}

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
[root@master1 work]# ls kube-proxy*.pem

创建 kubeconfig 文件

[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://172.10.0.20:6443 --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

创建 kube-proxy 配置文件

[root@master1 work]# vim kube-proxy.yaml
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 172.10.1.14
clientConnection:
  kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
clusterCIDR: 192.168.0.0/16                           # 此处网段必须与网络组件网段保持一致，否则部署网络组件时会报错
healthzBindAddress: 172.10.1.14:10256
kind: KubeProxyConfiguration
metricsBindAddress: 172.10.1.14:10249
mode: "ipvs"

创建服务启动文件

[root@master1 work]# vim kube-proxy.service
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/usr/local/bin/kube-proxy \
  --config=/etc/kubernetes/kube-proxy.yaml \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

同步文件到各个节点

[root@master1 work]# cp kube-proxy*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-proxy.kubeconfig kube-proxy.yaml /etc/kubernetes/
[root@master1 work]# cp kube-proxy.service /usr/lib/systemd/system/
master节点不安装kube-proxy，则以上步骤不用执行
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kube-proxy.kubeconfig kube-proxy.yaml $i:/etc/kubernetes/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kube-proxy.service $i:/usr/lib/systemd/system/;done

注：配置文件 kube-proxy.yaml 中 address 修改为各节点的实际 IP启动服务

[root@node1 ~]# mkdir -p /var/lib/kube-proxy
[root@node1 ~]# systemctl daemon-reload
[root@node1 ~]# systemctl enable kube-proxy
[root@node1 ~]# systemctl restart kube-proxy
[root@node1 ~]# systemctl status kube-proxy

4. 部署 Calico 容器网络 CNI 插件

[root@master1 work]# wget https://docs.projectcalico.org/v3.14/manifests/calico.yaml
[root@master1 work]# kubectl apply -f calico.yaml

此时再来查看各个节点，均为 Ready 状态

[root@master1 work]# kubectl get pods -A
[root@master1 work]# kubectl get nodes

5. 部署 CoreDNS 集群内置服务发现

下载 coredns yaml 文件：https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed 修改 yaml 文件： kubernetes cluster.local in-addr.arpa ip6.arpa forward . /etc/resolv.conf clusterIP 为：10.255.0.2（kubelet 配置文件中的 clusterDNS）

[root@master1 work]# cat coredns.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
  name: coredns
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
  name: system:coredns
rules:
- apiGroups:
  - ""
  resources:
  - endpoints
  - services
  - pods
  - namespaces
  verbs:
  - list
  - watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  annotations:
    rbac.authorization.kubernetes.io/autoupdate: "true"
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
  name: system:coredns
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:coredns
subjects:
- kind: ServiceAccount
  name: coredns
  namespace: kube-system
---
apiVersion: v1
kind: ConfigMap
metadata:
  name: coredns
  namespace: kube-system
data:
  Corefile: |
    .:53 {
        errors
        health {
          lameduck 5s
        }
        ready
        kubernetes cluster.local  in-addr.arpa ip6.arpa {
          fallthrough in-addr.arpa ip6.arpa
        }
        prometheus :9153
        forward . /etc/resolv.conf {
          max_concurrent 1000
        }
        cache 30
        loop
        reload
        loadbalance
    }
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: coredns
  namespace: kube-system
  labels:
    k8s-app: kube-dns
    kubernetes.io/name: "CoreDNS"
spec:
  # replicas: not specified here:
  # 1. Default is 1.
  # 2. Will be tuned in real time if DNS horizontal auto-scaling is turned on.
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  selector:
    matchLabels:
      k8s-app: kube-dns
  template:
    metadata:
      labels:
        k8s-app: kube-dns
    spec:
      priorityClassName: system-cluster-critical
      serviceAccountName: coredns
      tolerations:
        - key: "CriticalAddonsOnly"
          operator: "Exists"
      nodeSelector:
        kubernetes.io/os: linux
      affinity:
         podAntiAffinity:
           preferredDuringSchedulingIgnoredDuringExecution:
           - weight: 100
             podAffinityTerm:
               labelSelector:
                 matchExpressions:
                   - key: k8s-app
                     operator: In
                     values: ["kube-dns"]
               topologyKey: kubernetes.io/hostname
      containers:
      - name: coredns
        image: coredns/coredns:1.8.0
        imagePullPolicy: IfNotPresent
        resources:
          limits:
            memory: 170Mi
          requests:
            cpu: 100m
            memory: 70Mi
        args: [ "-conf", "/etc/coredns/Corefile" ]
        volumeMounts:
        - name: config-volume
          mountPath: /etc/coredns
          readOnly: true
        ports:
        - containerPort: 53
          name: dns
          protocol: UDP
        - containerPort: 53
          name: dns-tcp
          protocol: TCP
        - containerPort: 9153
          name: metrics
          protocol: TCP
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            add:
            - NET_BIND_SERVICE
            drop:
            - all
          readOnlyRootFilesystem: true
        livenessProbe:
          httpGet:
            path: /health
            port: 8080
            scheme: HTTP
          initialDelaySeconds: 60
          timeoutSeconds: 5
          successThreshold: 1
          failureThreshold: 5
        readinessProbe:
          httpGet:
            path: /ready
            port: 8181
            scheme: HTTP
      dnsPolicy: Default
      volumes:
        - name: config-volume
          configMap:
            name: coredns
            items:
            - key: Corefile
              path: Corefile
---
apiVersion: v1
kind: Service
metadata:
  name: kube-dns
  namespace: kube-system
  annotations:
    prometheus.io/port: "9153"
    prometheus.io/scrape: "true"
  labels:
    k8s-app: kube-dns
    kubernetes.io/cluster-service: "true"
    kubernetes.io/name: "CoreDNS"
spec:
  selector:
    k8s-app: kube-dns
  clusterIP: 10.255.0.2
  ports:
  - name: dns
    port: 53
    protocol: UDP
  - name: dns-tcp
    port: 53
    protocol: TCP
  - name: metrics
    port: 9153
    protocol: TCP
[root@master1 work]# kubectl apply -f coredns.yaml

https://s3-us-west-2.amazonaws.com/secure.notion-static.com/3fa82eff-fefa-43c6-ae8b-d9851b927ef3/1450914-20210118231536489-207986079.png

八、集群全链路高可用与业务联调验证

1. 部署测试用 Nginx 服务与 Pod 调度

[root@master1 ~]# vim nginx.yaml
---
apiVersion: v1
kind: ReplicationController
metadata:
  name: nginx-controller
spec:
  replicas: 2
  selector:
    name: nginx
  template:
    metadata:
      labels:
        name: nginx
    spec:
      containers:
        - name: nginx
          image: nginx:1.19.6
          ports:
            - containerPort: 80
---
apiVersion: v1
kind: Service
metadata:
  name: nginx-service-nodeport
spec:
  ports:
    - port: 80
      targetPort: 80
      nodePort: 30001
      protocol: TCP
  type: NodePort
  selector:
    name: nginx
[root@master1 ~]# kubectl apply -f nginx.yaml
[root@master1 ~]# kubectl get svc
[root@master1 ~]# kubectl get pods

2. 端到端服务互通、DNS 解析与网络连通性测试

ping 验证 nginx service

访问 nginx

本文标题：【Kubernetes】生产级高可用集群二进制部署全流程深度实战指南（v1.20.2）
本文作者：admin
本文链接：https://dev.x7lab.cn/article/86.html
版权声明：本博客所有文章除特别声明外，均采用 CC BY-NC-SA 4.0 许可协议。转载请注明来自本站！
admin

admin

云原生架构 · 全栈开发

感谢阅读本文！记录系统架构思考与实战复盘。专注于 Python、Django、PostgreSQL 与云原生容器化工程实践。

查看作者更多专栏 → 时间轴归档